Seasuide SUL2 uplocking reel seats

Suits rods #5-#9 blank diameter up to 9.5mm

Supplied with two lock tings and an endcap, or purchase an optional fighting butt trim band (trim band can only be purchased with a reel seat).
See also the lighter duty SUL1 model for rods rods #0-#6 with one lock ring and an endcap.

Well-made and good value slim up-locking reel seat in silver, smoky or black anodised finishes.
Supplied unassembled with an unfitted insert (matt carbon weave, red paduak, brown straight grain wood or brown figured burl).

Fits blanks up to 9.5mm butt diameter. For larger diameter blanks the seat can be mounted by trimming the butt end of the blank and fitting a spigot or stent of 7-9mm diameter to take the reel seat.  Make sure your spigot will fit the butt of your blank first!    Contact us if you wish to purchase a spigot.

Recommended fitting is to glue the hood into the cork recess first, then offer up to the other pre-assembled parts mounted on the blankI (or on a spigot if the blank butt is too large for the insert bore).

Made in China by Seaguide.

Dimensions

Full length including endcap 104mm
Visible length 96mm
Depth of hood recess 9mm
Hood diameter 21mm
Insert and threads outer diameter: 16.4mm
Skeleton ID: 14mm
Inserts: Bore 9.5mm, full diameter section 60mm length, tang OD 13.6mm
Skeleton weight 21.8g with and endcap (inserts 5-10g) Trim bands 2g lighter