Polished hardwood and cork inserts for LC14 Lemke Concepts cap-ring reel seats.
One insert can be purchased for each set of reel seat hardware at the price listed. The surcharge price applies for any inserts purchased without matching hardware.
Customers outside the UK: export purchase price will apply excluding UK VAT sales tax
Made in the UK by Taniwha Rodworks using a range of techniques and finishes to enhance wood figure and grain finishing with at least three dip coats of ultra hard, waterproof and flexible UV resistant clear coat. High gloss finish as standard. Cork inserts made in Portugal.
Inserts labelled with a two or three letter code and each is unique (one of each, cork excepted). If several inserts are listed as available under one code, then they are all very similar in appearance, colour, figure and quality to the one pictured.
Where the code has a third letter 'S' the wood has been stabilised by infusion with acrylic resin under vacuum and/or pressure. These inserts are hand made in the UK by Taniwha Rodworks using a range of techniques and finishes to enhance wood figure and grain finishing with at least three dip coats of ultra hard, waterportoof and flexible UV resistant clear coat. Then polished to a high gloss finish.
Outer diameter 0.64" 16.3mm
Length of polished section 3.4" 86mm
Diameter of rebate for screw fiitting: not applicable
Length of rebate for screw fiitting: not applicable
Internal bore 0.400 - 0.420" 10.5-11mm approximately
Insert weight typically 7-9g for hardwood or acrylic, cork 2g