Lemke GS1 reel seat inserts
Inserts to match GS1 Lemke Concepts reel seats, to fit both up lock or down lock seats.
One insert can be purchased for each set of reel seat hardware at the price listed. The surcharge price applies for any inserts purchased without matching hardware.
Customers outside the UK: export purchase price will apply excluding UK VAT sales tax
Inserts labelled with a two or three letter code are hand made by Taniwha Rodworks and each is unique (one of each). If several inserts are listed as available under one code, then they are all very similar in appearance, colour, figure and quality to the one pictured.
Where the code has a third letter 'S' the wood has been stabilised by infusion with acrylic resin under vacuum and/or pressure. These inserts are hand made in the UK by Taniwha Rodworks using a range of techniques and finishes to enhance wood figure and grain finishing with at least three dip coats of ultra hard, waterportoof and flexible UV resistant clear coat. Then polished to a high gloss finish.
Outer diameter 0.683" 17.35mm
Length of polished section 2.25" 50-60mm approximately
Diameter of rebate for screw fiitting (maximum) 0.61" 15.5mm maximum
Length of rebate for screw fiitting 0.75-1.1" 20-28mm
Internal bore 0.442" 12mm approximately
Insert weight typically 8-9g for hardwood or acrylic